Solderless Drum Repair Kit
If your drum pad is not working we can now offer you 3 choices to get you back up and drumming.
- Visit our Parts Store and order a new drum pad
- Order a Solderless drum repair kit from this page
- If you are good with a soldering iron we also have a slightly cheaper but more complex DIY solution on our drum repair kit page (note this also works for changing the cymbal sensors)
Our new Solderless Drum Repair Kit is the perfect balance of a simple and cheap fix for any unresponsive drum pad, consisting of the entire working parts of the drum pad which can be installed in under 10 minutes. This kit is compatible with the Guitar Hero and Band Hero drum kits for either the red, blue or green pads, or can just as easily be used to build your own custom drum kit.
The drum pads work by means of a small sensor on the underside of the drum pad which picks up vibrations when the pad is hit. The wires from this sensor take the signal back to the main circuit board of the drums where all the important processing takes place. This repair kit includes a pre-assembled sensor, wire, plug for the circuit board with the special adhesive pad to allow you to attach it to the drums.
Installation could not be simpler! Open up the back of your drums with the appropriate screwdriver (Phillips or Torx 10 both of which are common sizes) unplug the old sensor wire from the circuit board (using pliers if needed) and remove the old sensor from the underside of the drums, then plug the new sensor in and stick it back to the underside of the drums using the special adhesive pad provided with this kit. The installation video above shows just how easy this repair is.
We have plenty in stock for next day dispatch to anywhere in the world.
Choose a Currency
You may choose a currency from those shown below, if your local currency is not listed Paypal will automatically convert the payment for you. Worldwide shipping is included in the price you see - no extra charges.
Your shopping cart is shown on the menu bar at the top of the page
If you have any questions please have a look at our FAQs or Contact Us
Solderless Drum Repair Kit FAQ's
- Does this work on the red / blue / green pad?
Yes, these kits are made with longer cables to allow it to be used on whichever drum pads you require so no need to specify which pad you are repairing
- Is this kit compatible with the Band Hero drum kit?
Yes, the Band Hero Drum kit has almost identical internals so this kit has been tested on the new drum kit and it works perfectly
- Do I get instructions with my order?
No, in this case the repair is so simple that all the instructions you could need are contained within the tutorial video above, you will receive a conformation email with a link to this page.
- Do I need any special skills to fit this item?
No, if you can operate a screwdriver you will be fine to fit these!
- Where can I get a Torx Screwdriver
Have a look at our 8 in 1 Torx Screwdriver Set
- Can I use the sensor to repair my broken cymbal?
You could, but a cheaper option would be to just buy our standard drum repair kit, which also includes instructions on fitting a new sensor into your cymbal (soldering required)
