Yellow Washer & Nut

August 17, 2015 by  
Filed under GHWT Drum Parts

Yellow Cymbal Washer & Nut World Tour drum kit.

 

These specially made cymbal nuts and washers are used to attach the cymbals to the right and left sides of the World Tour drum kits. This yellow washer & nut is used on the left hand side of the drum kit.
Yellow Cymbal Washer and Nut Replacement FAQ's

  • Do I get instructions with my order?

No, these just screw onto the cymbal arm to hold on the cymbal

  • What tools will I need?

None

  • Do I need any special skills to fit this item?

No

  • Is this kit compatible with the Band Hero drum kit?

Yes

Orange Washer and Nut

August 17, 2015 by  
Filed under GHWT Drum Parts

Orange Cymbal Washer & Nut World Tour drum kit.

 

These specially made cymbal nuts and washers are used to attach the cymbals to the right and left sides of the World Tour drum kits. This orange washer & nut is used on the right hand side of the drum kit.
Orange Cymbal Washer and Nut Replacement FAQ's

  • Do I get instructions with my order?

No, these just screw onto the cymbal arm to hold on the cymbal

  • What tools will I need?

None

  • Do I need any special skills to fit this item?

No

  • Is this kit compatible with the Band Hero drum kit?

Yes

Midi and Bass Pedal PCB

March 7, 2013 by  
Filed under GHWT Drum Parts, Site Details

Midi and bass pedal PCB for Guitar Hero World Tour kit.

This is a midi bass pedal PCB thing.

Our midi bass pedals PCB is  supplied brand new and in protective packaging to ensure they reach you in perfect condition. Installation is simple, just unplug your old one and plug in your new one!


Midi and Bass pedal PCB Replacement FAQ's

  • Do I get instructions with my order?

No,

Cymbal Elbow Mount

March 7, 2013 by  
Filed under GHWT Drum Parts, Site Details

Comments Off on Cymbal Elbow Mount

Replacement Cymbal Eblow Mount Bracket for Guitar Hero World Tour drum kit.Cymbal Eblow Bracket

These are the black plastic parts which the cymbals are mounted on, with a threaded part at the top for attachment of the cymbal screw.

Our parts are supplied in protective packaging to ensure they reach you in perfect condition.The 2 Phillips (+) screws are also included

Fitting is a simple case of removing your old cymbal, unscrewing the two small Phillips (+) screws in the side of the bracket and pulling it upwards to remove it, installing the new ones is exactly the same procedure in reverse.

We have plenty in stock for dispatch to anywhere in the world.


Drum Pad Replacement FAQ's

  • Do I get instructions with my order?

No, the instructions on this page are sufficient but if you have any problems you can try the forums or email us for any additional help required

  • What tools will I need?

A screwdriver - small Phillips (+)

  • Do I need any special skills to fit this item?

No, if you can operate a screwdriver you will be fine to fit these!

  • Are left and right brackets the same as each other?

While they are marked L and R on the brackets they are identical so you will not need to specify which side you need.

  • Is this kit compatible with my drum kit?

These  will fit Xbox 360, PS2, PS3 and Wii drum kits for Guitar Hero World Tour (check on the bottom of your drumkit if you are not sure)

  • Is this kit compatible with the Band Hero drum kit?

No, Band Hero drum kits use a slightly different type of bracket.

Cymbal Repair Sensor

February 6, 2013 by  
Filed under GHWT Drum Parts, Repair stuff

Buy Guitar Hero drum / Cymbal Repair Kit

Each of the cymbals contains a sensor to register the vibration made by the drummers hit, our sensors have been extensively tested and are compatible as replacements for the cymbal pads in the Guitar Hero World Tour Drum Kit but will NOT work on the Band Hero GH6 circular cymbals. The repair kits come with 1 replacement sensor & fixing pads, full detailed fitting instructions and troubleshooting advice, within half an hour you'll be wailing on the skins again like there's no tomorrow!

We are now offering a bundle deal which adds one of our 8 in 1 Torx Screwdrivers to your order for a reduced price - just choose this option from the dropdown boxes below.

 

Cymbal Sensor Repair Kit FAQ's

  • Does this work on both cymbals?

Yes, the sensors on both cymbals are exactly the same so you will not need to specify which pad you need to repair when ordering

  • Is this kit compatible with the Band Hero drum kit?

No, it will NOT work on the circular cymbals

  • Do I get instructions with my order?

Yes, you will receive instructions via email when your item is dispatched showing how to use as either a drum or cymbal sensor replacement.

  • Do I need any special skills to fit this item?

You will need to know how to use a soldering iron

  • What tools will I need to fit it?
  • Soldering Iron & Solder (15 - 30 watts) Check out offers on soldering irons
  • Screwdriver - Either a Phillips + or a Torx T10 (both are common sizes) - Our excellent 8 in 1 Torx Screwdriver sets can be added to your order using the drop down menus above.

GHWT Blue Drum Pad

January 3, 2012 by  
Filed under GHWT Drum Parts

Comments Off on GHWT Blue Drum Pad

Buy Guitar Hero World Tour Blue Drum PadBlue Drum Pad Guitar Hero World Tour

The drum pads are quite sturdy items but they also take quite a bashing! If your drum pad is either physically broken, or wearing out you can easily and cheaply replace it to keep you drumming( if your pad is just not working you should take a look at our Solderless Drum Repair Kits which are a very simple fix to do yourself ). please note this drumpad is only for the Guitar Hero World Tour drum kit

 

For fitting instructions see the tutorial video

 

Drum Pad Replacement FAQ's

  • Do I get instructions with my order?

No, in this case the repair is so simple that all the instructions you could need are contained within the tutorial video above, you will receive a conformation email with a link to this page.

  • What tools will I need?

A screwdriver (either small phillips or a torx T10) and possibly a small pair of pliers to remove the small plug from the circuit board.

  • Do I need any special skills to fit this item?

No, if you can operate a screwdriver you will be fine to fit these!

  • Are the pads all the same as each other?

All the pads in the Guitar Hero World Tour drum kit are exactly the same as each other apart from the length of the wires coming from the pad to the circuit board, red pads have the longest wires, then green and blue have the shortest

  • Is this kit compatible with the Band Hero drum kit?

No, Band Hero drum kits use a slightly different type of pad.

GHWT Green Drum Pad

January 3, 2012 by  
Filed under GHWT Drum Parts

Comments Off on GHWT Green Drum Pad

Buy Guitar Hero World Tour Green Drum PadGreen Drum Pad Guitar Hero World Tour

The drum pads are quite sturdy items but they also take quite a bashing! If your drum pad is either physically broken, or wearing out you can easily and cheaply replace it to keep you drumming( if your pad is just not working you should take a look at our Solderless Drum Repair Kits which are a very simple fix to do yourself ). please note this drumpad is only for the Guitar Hero World Tour drum kit

 

For fitting instructions see the tutorial video

 

Drum Pad Replacement FAQ's

  • Do I get instructions with my order?

No, in this case the repair is so simple that all the instructions you could need are contained within the tutorial video above, you will receive a conformation email with a link to this page.

  • What tools will I need?

A screwdriver (either small phillips or a torx T10) and possibly a small pair of pliers to remove the small plug from the circuit board.

  • Do I need any special skills to fit this item?

No, if you can operate a screwdriver you will be fine to fit these!

  • Are the pads all the same as each other?

All the pads in the Guitar Hero World Tour drum kit are exactly the same as each other apart from the length of the wires coming from the pad to the circuit board, red pads have the longest wires, then green and blue have the shortest

  • Is this kit compatible with the Band Hero drum kit?

No, Band Hero drum kits use a slightly different type of pad.

Stick Holder

March 13, 2011 by  
Filed under GHWT Drum Parts

Comments Off on Stick Holder

Buy Guitar Hero World Tour Drum Stick HolderStick Holder

The two stick holders sit in the top face of the drum kit and pop out providing a handy place to store your sticks when not using your drumkit.   They are secured from inside the drum kit (meaning you will have to open your drum kit to fit) and are secured by 2 phillips screws for easy replacement.

Stick Holder Replacement FAQ's

  • Do I get instructions with my order?

No, but if you need to know how to open your drum kit we have a tutorial video availiable

  • What tools will I need?

Phillips screwdriver and / or Torx T10 screwdriver

  • Do I need any special skills to fit this item?

No

 PLEASE NOTE THIS IS THE PRICE FOR ONE STICKHOLDER

Drum Sticks

March 13, 2011 by  
Filed under GH6 Drum Parts, GHWT Drum Parts

Comments Off on Drum Sticks

Buy Guitar Hero Drum SticksOfficial Drum Sticks

The original, branded, drumsticks that come with all versions of the Guitar Hero Drums

Easily lost or damaged, the solid wooden drum sticks that come with the drum kit are ideally suited for playing on the Guitar or Band Hero drum kits, while other sticks will also work the original sticks are highly recommended. Please note the sticks come as a pair (2 sticks included)

 

Solderless Drum Repair Kit

February 3, 2010 by  
Filed under GH6 Drum Parts, GHWT Drum Parts, Repair stuff, Tutorials

Buy Guitar Hero Drum Repair KitWe are very happy to bring you the latest product in our range of repair and upgrade parts for your Guitar Hero Instruments, the long awaited Solderless Drum Repair Kit.

We have been selling a drum repair kit on Guitar Hero Repair for a while now, but the feedback we have been getting is that it is quite fiddly and difficult to fit, well in response to this we have now launched the new version of this kit.

It can be used to fix any of your main drum pads on both the Guitar Hero and Band Hero drum kits and takes no more than 10 minutes to fit with just a screwdriver needed.

The drum pads work by means of a small sensor on the underside of the drum pad which picks up vibrations when the pad is hit. The wires from this sensor take the signal back to the main circuit board of the drums where all the important processing takes place. This repair kit includes a pre-assembled sensor, wire, plug for the circuit board with the special adhesive pad to allow you to attach it to the drums.

Installation could not be simpler! Open up the back of your drums with the appropriate screwdriver (Phillips or Torx 10 both of which are common sizes) unplug the old sensor wire from the circuit board (using pliers if needed) and remove the old sensor from the underside of the drums, then plug the new sensor in and stick it back to the underside of the drums using the special adhesive pad provided with this kit. The installation video above shows just how easy this repair is.

Solderless Drum Repair Kit FAQ's

  • Does this work on the red / blue / green pad?

Yes, these kits are made with longer cables to allow it to be used on whichever drum pads you require so no need to specify which pad you are repairing

  • Is this kit compatible with the Band Hero drum kit?

Yes, the Band Hero Drum kit has almost identical internals so this kit has been tested on the new drum kit and it works perfectly

  • Do I get instructions with my order?

No, in this case the repair is so simple that all the instructions you could need are contained within the tutorial video above, you will receive a conformation email with a link to this page.

  • Do I need any special skills to fit this item?

No, if you can operate a screwdriver you will be fine to fit these!

  • Where can I get a Torx Screwdriver

Have a look at our 8 in 1 Torx Screwdriver Set

  • Can I use the sensor to repair my broken cymbal?

You could, but a cheaper option would be to just buy our standard drum repair kit, which also includes instructions on fitting a new sensor into your cymbal (soldering required)

Next Page »