With Guitar Hero 5 and Beatles Rock Band coming out at the same time there was bound to be comparisons drawn. This is a very off the wall of comparing the two of them and commenting on the whole Guitar Hero Series - Be warned though, this video does contain some 'language' and should not be viewed by under 18's!

Funny and well worth a watch but maybe not entirely our view of the state of things!

Did you know you can connect your e-drums up to your console and use them to play Guitar Hero with? Well one of our lovely site visitors has done you a nice easy to follow guide to help you on your way!

This example is for the Xbox 360 but it should work just the same on any console.

To get your e-drum working with Guitar Hero on the Xbox 360 you need a least the following six things:

- an e-drum with a MIDI Output, e.g. Roland TD-12,
- the Xbox 360 Controller Box from the Guitar Hero drum kit,
- the Drum Brain from the Guitar Hero drum kit (it's called "DRUM SYNTH V2R00" on the circuit board),
- the MIDI Input from the Guitar Hero drum kit,
- a MIDI cable,
- a Guitar Hero game which supports drums (all versions including World Tour and up should work).

You can get all of these parts (except the MIDI cable) from the guitar hero spare parts store for a very reasonable price. Of course you can get a Guitar Hero Drum Kit and use this as your MIDI connector to the Xbox, but that might take up a little bit too much space in your living room.

click to enlarge

Now to the setup:
1) Connect the Drum Brain to the Xbox Controller. Make sure that the red cable is connected to the pin marked "CK".
2) Connect the MIDI Input to the Drum Brain. The red cable must align with the "Kick" pin.
3) Connect your e-drum's MIDI Output with the MIDI cable to the Guitar Hero's MIDI Input.
4) Put some batteries in the Xbox Controller, turn on your e-drum and the Xbox Controller and start Guitar Hero (at least World Tour, Guitar Hero III doesn't support drums). Make sure, the Xbox Controller is paired and works (i.e. you can navigate the menus).
5) If your e-drum sends the standard MIDI notes for the different pads on the standard MIDI channel for drums, you should be set and ready to go. Just choose Drums as your instrument and give it a try.

That was easy, wasn't it?! For a little more tweaking, just read on.

Hm, what to do, if the e-drum doesn't use the correct MIDI channel or notes? That involves a little bit more of work, but no magic at all.

Go to your devices MIDI setup (check with your manual on how to get
there) and set your e-drum's transmit channel to 10. This setting is usually buried somewhere in the global settings.

Now the only thing left to do is to set the pads to send the correct MIDI notes for Guitar Hero. This setting is usually done in the pad's settings section. You need to setup them up like this:

Red Pad: Note 38,
Yellow Pad: Note 46,
Blue Pad: Note 48,
Green Pad: Note 45,
Orange Pad: Note 49,
Purple Pad (Kick Pedal): Note 36.

The Red pad is usually a Snare Drum sound, so it's a good idea to map your SD pad to note 38. Blue and Green are Tom Sounds, Yellow and Orange are Hi Hat resp. Cymbal. Purple is the Kick Pedal (Bass Drum).

If that didn't work, first try the other MIDI connector on your e-drum.
Sometimes the MIDI connectors are labeled weird regarding Input/Output.

If you have got multi-zone pads that send different notes when being hit in different zones, make sure to map them to the same note. E.g., a Snare Drum pad is usually equipped with a rim and head sensor. You want Guitar Hero to recognize both sensors, so set both to Note 38. The same applies for multi-zone Cymbal Pads and so on.

Of course you can map your pads to your liking. I have my Ride pad and the Hi Hat mapped to the same note and both the Crash pads mapped to the other colour, so that you are free to play the rhythm stuff on the HH or Ride to your liking (or whatever the sounds in Guitar Hero are like ...;-) ).

Hope you enjoy it. If you have any problems, just drop a note in the comments.

Many thanks to our reader for that nice tutorial.

We couldn't stop without having a little play ourselves and have come up with a nice little mod to this guide, allowing you to enclose all the parts in the original controller box. The mod is quite simple all you need to do it to cut the GHWT midi port out and replce it with a slick looking surface mounted one which will cost pennies.

Open the back of the controller box by removing the four screws in the back

click to enlarge

Cut the circuit board off the end of the Guitar Hero midi port cable leaving you with as much of the ribbon cable attached as possible, You wil see that the ribbon cable is made up of 6 wires, we only need wires 3 and 4 (doesn't matter which way you look at it, it's the middle two!). You need to strip and solder these two wires onto your surface mounted midi port, attaching them to the same pins as they were attached to before (The red and yellow lines on the image show where they were attached, look at your own it will become clear, just make sure you have the midi port the right way up!)

click to enlarge

Drill a hole in the side for the port to go through and your done! You should have plenty of room to fit everything back inside the controller box, leaving you with one small neat box to connect up!

click to enlarge

If your one of your drum pads are broken you have a number of options, throw in the towel and get a new drum kit (...Whaaat! We are in a recession don't you know!), get one of our drum repair kits, or replace the whole drumpad (which you can get from our Guitar Hero parts store)

This is a short video we have produced to show you just how easy it is to do! All you need is a new pad, a screwdriver and 5 spare minutes take a look and tell us what you think. If you have any problems with this or any other Guitar Hero related problem take a look in our Guitar Hero repair forums

GuitarHeroRepair.com has just had a new makeover!  The site still has all the functionality you need - online shop, spares, advice, videos, news etc but faster, slicker and easier to navigate.

We hope you enjoy this update and thanks for your feedback and support.